How To Remove A Dishwasher & Install New One?

When your dishwasher isn’t working appropriately, it’s time to replace it with a new one. It may be a slightly daunting task but not very tough. But we are here to help!
Fortunately, our experienced team will give you a complete guide on how to remove a dishwasher so you can install the new dishwasher easily. The instruction process is very easy and stress-free.
Let’s get started!

How Hard Is It To Install A Dishwasher?

Though the project doesn’t require advanced electric skills, installing a dishwasher is really an easy job. Replacing a new dishwasher needs the perfect know-how and tools, including installation kits. You can complete the job if you can measure up and fit the dishwasher correctly under the bench. I
If you don’t have any previous experience on how to remove a dishwasher or installing it, you can take the help of the product’s instruction manual.

How To Disconnect A Dishwasher?

Well, if you have a COMFEE’ Countertop dishwasher, it will be very simple to disconnect. Some simple steps will help you to remove the damaged dishwasher without any second hand assistance.

Tools To Remove Dishwasher:

  • Hand Gloves
  • Screwdriver
  • Wrench
  • Current detector
  • Cardboard
  • Old Towel

How to Pull out a Dishwasher to Clean Behind it Step by Step

Step 1: Turn Off the Power

First, turn off the power cable. It is better than turning off the power at the plug, just unplugging the socket and turning off the breaker. It is good for extra safety.

Note: Some dishwashers don’t plug into the outlet. They normally stay hard-wired into the electrical circuit. If your dishwasher remains in this situation, hire an experienced electrician to shut off the power at the breaker and the inner of the dishwasher’s control panel.

Step 2: Turn Off the Water

Next, turn off the water. You can do it from the shutoff valve, which controls the water line into the dishwasher. Usually, it is linked under the sink and added with the hot water pipe.
There are different ways to shut off the valve, which controls the water from the kitchen faucet to the dishwasher. If you can’t fail to identify it, you need to turn off your house’s central water source before jumping on the next steps.

Step 3: Disconnect the Water Supply Line

After turning off the power and water supply line, you have to disconnect the water supply line. For this, lay down a towel or a medium-sized bowl under the water line to catch the water or water drops.
The water supply line looks like a little copper coated with wire mesh. It remains from the dishwasher to the shutoff valve. Using the channel lock pliers, detach the water supply line from the channel on the shutoff valve.
If the connection doesn’t include the shutoff, you may need to unhook the compression fitting nut. This joins the water supply line with the hot water line.

Step 4: Disconnect Drain Line

In this step, you should find the rubber hose that started from the dishwasher. Now follow it at the bottom point where it is linked. It may move to the fitting mounted to the countertop or may be run to the trash’s disposal. Lay another towel under this hose to catch the water or water drops.
It can be connected to the countertop with the air gap fitting. So, lose the clip and remove the hose. If this drain line is detached from the debris disposal, you must disconnect the tube at the nipple fitting.

Step 5: Disconnect Dishwasher

Now open the dishwasher after checking whether the mounting brackets are safe or not to disconnect. You will get a sign around the frame of your dishwasher about its safety or danger. Then use the screwdriver to remove the screw.
When you complete it, you will have to unscrew the legs of the dishwasher. It may need to eradicate the kickboard. After that, twist the legs to lower your dishwasher. Continue it until there is enough room between the top and the dishwasher from the bottom of the counter. It will make the task easier to pull out the dishwasher under the countertop.

Step 6: Remove The Dishwasher

Finally, your dishwasher is ready to remove under the counter. Slide the dishwasher frontward carefully and pull it out from the cabinet. If you need any help second-hand to lift this heavy appliance over the floor, call someone from your family. You should also clean cabinets, it can be by baking soda.
You may need help serving the water supply line with the drain line through the hole of the cabinet side. You also have to keep in mind to lift the dishwasher to avoid any damage to your floor. For safety, you should lay down a cloth on the floor. That’s it to remove the old dishwasher. Now get prepared to fit the new one.


If your kitchen floor height exceeds under your dishwasher, you should adjust the feet in every corner of the machine to pull it out. If you face any issue and you don’t feel well enough to solve this problem, you have to go to consult a plumber for assistance.

Dishwasher Removal Service

As your dishwasher has been damaged or destroyed so roughly and you can’t understand how to get rid of it? And also impossible to remove it by yourself, you should contact the dishwasher removal service provider. Jung King, Loadup, and the Junkluggers are the best dishwasher removal service providers Company.
They offer effective, safe, and eco-friendly appliance removal services at affordable costs. Since some kitchen appliances are very heavy, like dishwashers, washing machines, refrigerators, and stoves, they are impossible to pick up, load, and remove easily. So getting the service from a reliable provider is the best idea.

How To Install a New Dishwasher?

You need the following installation tools:

  • Screwdriver/driver drill
  • Cardboard
  • Tape for measurement (Optional)
  • A mop
  • A bucket
  • Intel and outlet hose
  • Instructions
  • Attach Electric Cord

First, remove the access panel on the dishwasher and make the connection. The access panel is located on the anterior of the dishwasher. Identify the power cord, water inlet solenoid, and drain fitting to attach the fitting.

Now remove the wire connection housing and make three wires: green, white, neutral, and black hot wire. And cover the wire connection housing.

Hook Up Water Supply

Now install the dishwasher 90˚ to hook up the dishwasher’s water supply. Find out the water inlet fitting on the valve. Apply some joint pipeline multiple to the fitting gears and thread it into the valve. Finally, tighten it by hand using a channel lock plier.

Attach Water Supply Line

The dishwasher connector tool includes a steel water supply tube. Strand the connection nuts on the dishwasher 90˚ fitting and then tighten it using the channel lock pliers. It is a multifaceted fitting but doesn’t require any joint pipeline complex. But don’t overtighten.

Position the new Dishwasher

Now keep the dishwasher in the right position so you can connect all connections in the backside of the machine. For example: turn it right side, place it under the kitchen counter, feeding power cord and water supply line with a drain hose through the hole of the cabinet.

  • Following the instructions manual-
  • Level the dishwasher,
  • Unscrew the legs,
  • Bring the machine up to kitchen counter height,
  • and then level it.

Anchor the Dishwasher

When you can place the dishwasher where you wish, open the door to access the mounting brackets. Using the screwdriver, fit the cabinet frame under the brim of the counter.

Attach the water supply line

Connect the end of the water supply line to the shutoff valve underneath your kitchen sink. Now turn on the shutoff valve and check for any leaks. Now look under the appliance and check for the leaks at the ending point of the water supply tube. If you get any leaks, gently tighten them.

Connect the drain hose

The rubber drain hose is connected already to the dishwasher. If not, connect them properly using a hose clamp.

Test The Dishwasher

Finally, when you have connected all joints appropriately, it’s time to test the dishwasher if there is any missing or not and if the machine is working perfectly.

For this, first, plug in the electric cord. Test it by running a full cycle without putting any plate. Ensure that it delivers fresh water and drains it properly flowing without any leaking connection. And finally, you can test it by putting a few plates and some appliances into it. If everything is okay, you have done the job successfully.

Do You Need A Plumber To Install A Dishwasher?

Every project doesn’t require advanced plumbing to install a new dishwasher. Installing a dishwasher machine effectively only requires the perfect information on how to install it and what tools are needed.

You also should know about installing dishwasher kits with 90˚ fitting and water supply lines. Without any emergency or seriousness, booking plumbers is a less urgent job.

Dishwasher Installation Service Near Me

Mr. Rooter is the best local plumbing service Company that offers its dishwasher installation service in around 300 locations across the USA and Canada. Another local expert plumber is Jim’s plumbing. They provide their service 24/7 in fully safe and effective ways.

Cost Of Dishwasher Installation

The dishwasher installation cost range can be from $370 to $1500, whereas the national cost can be an average of $970. The range is an average rating of international and national costs. It may more or less depend on the labor cost. If you need to purchase some more kits or supplies for the installation of your new dishwasher, the cost will be increased.

Wrap Up!

And finally, we think you know the process of discharging a dishwasher with installing a new one, whether plugged or hard-wired. It is very exciting to always have a new appliance. We hope our instructions will help you to remove your damaged dishwasher and install a new one without hiring any plumber.
Therefore, if you have any doubt, it’s urgent to call a plumber or expert electrician. They must help you though it will be pretty expensive.

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.